Oki IP-7900-26 Guide De Référence Rapide page 30

3
# M A I N T E N A N C E
> S P I T T O O N C A S E / U N I T ?
Press the key.
4
# M A I N T E N A N C E
* S P I T T O O N C A S E / U N I T ?
Press the key.
5
# M A I N T E N A N C E
* W I P E R L I Q U I D ?
Select [WIPER LIQUID] and press the
6
O P E N C O V E R
7
W I P E L I Q U I D C H E C K E D ?
Y E S : O K / N O : C A N C E L
After you have finished the replacement
procedure described from step 8, press the
key.
8
Cleaning liquid port
Check the wiper cleaning liquid level.
Check that the cleaning liquid supply hole is at the top
face's lower right of the wiping unit.
- Wiper cleaning liquid is supplied in two different
types of bottle. If you find it not convenient to
directly replenish the liquid with the bigger 300 ml
bottle, first transfer the liquid in the wiper cleaning
liquid bottle of 200 ml included in the daily
maintenance kit to make the operation easier.
key.
Liquid level
Wiper cleaning liquid
When the cleaning liquid level is lower than the "
" mark's top edge, replenish the wiper cleaning
liquid.
Replenish the liquid so that the cleaning liquid level is
lower than the " " mark's top edge.
9
Close the wiping cover and the front cover.
Note
- Be sure to unlock the stopper before closing the wiping
cover. If you try to close the wiping cover without
unlocking the stopper, the stopper may bend, or the
bent stopper may touch the carriage, which may damage
the Printer.
Replenish spittoon absorber liquid
When replenishing the spittoon absorber liquid from the
operation panel menu, start the procedure from step 1. When
replenishing the spittoon absorber liquid while executing
[#START MAINTENANCE], start the procedure in step 6.
1
á R E W I N D F O R M F E E D â
ß P H . R E C P H . M A I N à
Press the key.
2
# S T A R T M A I N T E N A N C E
>
key select [#MAINTENANCE].
With the
3
# M A I N T E N A N C E
> S P I T T O O N C A S E / U N I T ?
Press the key.
29