Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Configuration And Operation
Configuration Examples
Net-X™ is extremely versatile, with DMX source capabilities and Art-Net™ source
capabilities which can be combined so that the Net-X™ is acting as a DMX splitter, an
Art-Net™ adapter, and an Art-Net™ hub.
DMX Source (DMX Splitter)
DMX source-only configuration uses the Net-X™ as a DMX splitter. The DMX signal comes
in from one or both of the DMX In ports and goes out through one or more of the DMX Out
ports.
To configure the Net-X™ as a DMX splitter with the input and output assignments listed here
· DMX In port 1 goes to DMX Out ports 4 and 5
· DMX In port 2 goes to DMX Out ports 7 and 8
Do the following:
1. Disable unused DMX Out ports by doing the following for DMX Out ports 1, 2, 3, and 6:
a) Press <MENU> repeatedly until <DMX Output Port #X> shows on the display.
b) Press <ENTER>. The phrase in the lower right-hand corner of the display
c) Press <UP> or <DOWN> until <Without Input> shows in the lower right-hand
d) Press <ENTER>. <Without Input> stops flashing.
2. Configure the DMX Out ports that will receive from DMX In port 1 by doing the following
for DMX Out ports 4 and 5:
a) Press <MENU> repeatedly until <DMX Output Port #X> shows on the display.
b) Press <ENTER>. The phrase in the lower right-hand corner of the display
c) Press <UP> or <DOWN> until <DMX #1 Input> shows in the lower right-hand
d) Press <ENTER>. <DMX #1 Input> stops flashing.
3. Configure the DMX Out ports that will receive from DMX In port 2 by doing the following
for DMX Out ports 7 and 8:
a) Press <MENU> repeatedly until <DMX Output Port #X> shows on the display.
b) Press <ENTER>. The phrase in the lower right-hand corner of the display
c) Press <UP> or <DOWN> until <DMX #2 Input> shows in the lower right-hand
d) Press <ENTER>. <DMX #2 Input> stops flashing.
Page 16 of 62
flashes.
corner.
flashes.
corner.
flashes.
corner.
Net-X™ User Manual Rev. 2
Publicité
Table des Matières
