Mounting
Before mounting this product, read and follow the Safety Notes. For our Chauvet line of
mounting clamps, go to www.trusst.com/productcategory/accessories-clamps/.
Orientation
Always mount this product in a safe position and make sure the menu and the ports are
accessible and there is adequate room for ventilation, configuration, and maintenance. The
Net-X fits nicely in a standard 19" rack, can be suspended upright or upside down, or it can
be placed on its rubber feet on a flat level surface.
Use the following guidelines when mounting the Net-X:
· When selecting an installation location, consider easy access to this product for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the product's
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
· When hanging this product, always secure to a fastening device using a safety cable.
· Leave enough slack on the cables to prevent tension and pull on the plugs.
Mounting Diagram
Safety Cable
Net-X™ User Manual Rev. 2
Setup And Installation
Mounting Clamp
M12 Threaded
Mounting Hole
Removable Ears
for Rack Mounting
Page 11 of 62