System Set Up - Aerus Laundry PRO Manuel De L'utilisateur

SYSTEM SET UP

Plug power cord into the wall outlet of your
1
home's electrical power system. See page 4
for electrical requirements.
Turn on the cold
2
water valve.
NOTE:
Your Laundry Pro will automatically turn on and off as your washing machine starts, and stops.
WARNING:
Electrical Shock Hazard. When working with electrical
connections, the appliance and surrounding area should
be clean and dry of any standing water. Failure to follow
these instructions can result in death, fire, or
electrical shock.
WARNING:
Electrical Shock Hazard. Do no use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
Check all hoses to ensure no water
3
is leaking. Tighten if necessary.
Start your washer.
4
The status light should illuminate blue
after a few seconds.
Status Indicator Lights
9