Before You Start; Removing Cover - Aerus Laundry PRO Manuel De L'utilisateur

BEFORE YOU START

NOTE:
Your Laundry Pro unit was factory tested. It is normal for some
residual water to still remain in the unit as a result of these tests.
• Remove your new Laundry Pro from its packaging.
• Inspect the unit for any signs of shipping damage.

REMOVING COVER

Remove the two (2) cover
1
screws located on the bottom
of the unit.
Remove the two (2) screws
2
(not shown) along the top
of the Laundry Pro.
To remove the cover, pull the
3
top away from the unit, then lift
off the cover.
Screws
5