Status Indications - Aerus Laundry PRO Manuel De L'utilisateur

TEMPERATURE CONTROLLING WATER VALVES
Some washers monitor the incoming cold water temperature and adjust too cold of water by adding hot water, even if the
water temperature is set to cold. If you have one of these washers, do not install with the "Y" adapter. Failure to do so may
cause the washer to not operate correctly. Consult your washing machine owner's manual if needed.
EXTERNAL WATER TAP (AVAILABLE SEPARATELY)
An optional Laundry Pro water tap allows you to run oxygenated water for other uses such as cleaning surfaces.
(ActiveClean Port - 49737-EURO, 49693-US)

STATUS INDICATIONS

The Laundry Pro monitors its operations with
status indicator lights.
• Blue light indicates normal operation
• Red light indicates a possible issue
• Red light with audible alert indicates a possible leak
If this occurs, please contact Customer Service
at (800) 243-9078 (U.S.) or (800) 668-0763 (CANADA). For
customers outside of the U.S. or Canada, contact your
country's Customer Service Center. If you do not have contact
information for your country's Customer Service Center,
please contact U.S. Customer Service for assistance.
12
Status Indicator Lights
WARNING:
• Electrical Shock Hazard. Disconnect power before
attempting installation or service.
WARNING:
• Electrical Shock Hazard. When working with electrical
connections, the appliance and surrounding area should be
clean and dry of any standing water. Failure to follow these
instructions can result in death, fire, or electrical shock.
CAUTION:
• Do not operate Laundry Pro with the UV shield or front
cover removed or improperly installed. Failure to follow
these instructions can result in severe eye damage, death,
or electrical shock.