Connecting The Power Adapter - Aerus Laundry PRO Manuel De L'utilisateur

HOSE INSTALLATION
NOTE:
If your existing hose is more than 3 years old, it is our recommendation that you replace
it with the optional stainless steel hose (item #49738-EURO, 49701-US).
Connect the hose from the cold
3
water inlet on your washing
machine to the INLET connection
on your Laundry Pro.
CONNECTING POWER ADAPTER
CAUTION:
1. Insert the provided power cord into the
POWER IN socket located on the back of the unit.
(Note: Do not plug the adapter into the wall socket
until installation is complete. See page 9.)
2. Align mounting screws with mounting keyholes
on back of unit and place unit on wall.
The AC/DC adapter
is designed to work
worldwide. The
electrical plug may be
removed and *other
types added depending
on the country electrical
requirements.
*Other types are optional. Not included.
8
4
Do not use any AC/DC adapter other than the one supplied with your Laundry Pro or Aerus replacement
AC/DC adapter (item #49742-EURO, 49700-US). Failure to follow these instructions may void your warranty
and/or result in damage to your unit, fire, or electrical shock.
Connect the new hose provided
with your Laundry Pro to the
water OUTLET connector on
your Laundry Pro unit.
NOTE: To ease hose installation and prevent cross threading,
connect hoses prior to mounting unit on wall.
Finally, connect the new hose
5
to the cold water inlet on your
washing machine.