Publicité
Les langues disponibles
Les langues disponibles
Dimensions and Mounting
Mounting Plates with M6 x 25mm studs slide in the attachment slot as shown in above drawing.
There will be enclosed 2 Mounting Plates and 2 flanged nuts for Bars up to 1m and after that one
per extra 500mm of bar.
Installation
Ions are projected outwards towards the product. It is important that there are no parts of the
machine in front of the Bar or beside the Bar (marked in red in the picture below) as this will attract
the ionised air and reduce the amount of ionisation available to neutralise the problem.
Instructions/Booklet/Ionstorm iss.8
9
Publicité
