Publicité
Les langues disponibles
Les langues disponibles
Ionstorm 3850 Connector Boxes
Connecting more than one 3850 Bar to the 3700 Controller.
A Connector Box is the most common method of serving more than one Bar. It is more versatile
than having Bars in series. The connector consists of a plastic box with 2, 3 or 4 pairs of HT
sockets and one HT Cable 500mm long heading to the 3700 Controller. Longer lengths of cable
can be supplied if required. The sockets are colour coded: one side red, the other side blue (see
picture below).
On each 3850 Bar there are two bayonet connectors at the end of the HT cable: one has a red
sleeve and the other one a blue sleeve.
IMPORTANT: It is important that the red coded connector is put into the red side of the
connector box and the blue coded connector into the blue side.
Dimensions
Connector Box Mounting Brackets
Kit Includes:
2 x M5 x 40mm socket screws
Mount the connector box using the screws provided, ensuring it is away from moisture, oils or
similar substances.
Instructions/Booklet/IonstormSC
10
Publicité
