Setup Lh101-R - Unit Setup; Battery Voltage - Lenz Digital plus LH101-R Instructions D'utilisation

6

Setup LH101-R - Unit Setup

This section describes settings that you can only make on the
LH101-R radio handset.
All settings that apply to both the radio handset control LH101-R and
the wired handset control LH101 are described in the operating
instructions for the LH101.
The settings are permanently stored in the LH101-R.

6.1 Battery voltage

With the help of this menu item in the setup of the LH101-R you can
check the voltage of the inserted batteries.
You can recognise a drop in the battery voltage by
•
the decreasing contrast of the display
•
the flashing battery symbol in the display
If you are using rechargeable batteries (instead of batteries),
replace the batteries now.
Batteries can be used up to a voltage of 1.4V.
Rechargeable batteries must be replaced at a voltage of 2V.
Switch off the LH101-R in good time when the flashing
battery symbol is displayed.
It is not possible to charge batteries in the LH101-R.
To display the battery voltage:
Action Display
Starting from locomotive control ...
Explanation
33
E