Troubleshooting - RELAXXNOW VTX400 Manuel D'utilisation

15. TROUBLESHOOTING

If the fan stops working, please follow these steps before contacting customer
service:
PROBLEM
The fan does not turn on.
The fan has stopped
suddenly.
The oscillation function
does not work.
The fan is on, but the
air power is not strong
enough.
The remote control
does not work.
POSSIBLE CAUSE
Fan is not connec-
ted to a 220-240V
AC, 50/60 Hz
outlet.
The timer has
expired and the fan
has switched off
automatically.
The oscillation
function was not
switched on.
Dust has collected
on the back of the
fan.
The batteries are
too weak.
The remote is too
far away from the
device.
SOLUTION
Plug it into the appropriate outlet
and turn it on again.
Make sure all the timer lights on
the control switch are off. When
one of the lights is lit, press the
„Timer" button until all LEDs are
off.
Make sure that the corresponding
Oscillating function LED is lit. If
not, press the button to start the
function. This can also be done
while the fan is in operation.
Turn off the fan and pull out the
plug. Clean the rear grille with a
soft, dry cloth. Plug in the plug and
turn it back on.
Follow the operation of the remote
control and the guidelines for using
the remote control batteries.
Relaxxnow 35