Transport And Storage; Cleaning And Maintenance - RELAXXNOW VTX400 Manuel D'utilisation

4. Set Oscillation (OSC)
With this setting you achieve a uniform ventilation.
• Press the „Oscillation button".
• The „oscillation mode" is now activated.
• The tower fan swivels evenly from left to right within a radius of 70 °.
• This setting provides fast and efficient cooling.
5. Set timer (30min up to 7hrs and 30min)
• Press the „Timer" button to set the desired time period. By repeatedly
pressing the „Timer" button, the duration is increased by 30 minutes.
The sum of the flashing LEDs indicates the total time.
The device will remain in operation until the time has expired. After the
time has elapsed, the device switches off automatically.

13. TRANSPORT AND STORAGE

Improper storage could damage the device.
Please note the following important warnings.
BEFORE transportation / BEFORE storage:
1. Turn off the power and unplug the power cord from the wall outlet.
2. Always pull directly on the mains plug, not on the mains cable.
AFTER relocation of the device:
3. ALWAYS position the device upright.

14. CLEANING AND MAINTENANCE

• Before you clean the fan, it is important to make sure that the device is
switched off and the adapter is unplugged from the socket!
• Clean the device at regularly.
• Do not allow liquids to come in contact with the motor or electronic
components during cleaning.
• Clean the propeller and protective grids with a soft, damp, lint-free cloth and
then dry.
• Do not use aggressive cleaning agents (such as thinner, alcohol or other
chemical liquids) to clean the fan.
• Tighten visible screws at regularly.
34 Relaxxnow