NOMA 052-4345-2 Guide D'utilisation page 7

Choosing a Location for the Ceiling Fan
Choose a location where there is a high
enough ceiling clearance, at least 6' 11"
(2.1 m) between the floor and the blades
(fig. 3).
located in the centre of the room, or a
minimum of 32" (81.3 cm) from adjacent
walls or obstructions.
CAUTION! If there is light fixture at your
chosen location, remove the light
fixture first. Before removal, ensure to
fuse or circuit breaker box.
Choosing Mounting Styles
Flush-mount installation (for lower ceilings) Drop-mount installation (for normal ceilings)
This method is recommended if maximum
headroom is required. The ceiling must be
completely horizontal and level (fig. 4).
Follow step 1-9, omitting step 3 in the
manual.
WARNING!
The outlet box and joist must be securely mounted and capable of reliably
supporting at least 35 lb (15.9 kg).
To reduce the risk of electric shock, mount the fan only to an outlet box marked
"Acceptable for Fan Support", and use the supplied outlet box screws. Most outlet
boxes commonly used to support light fixture are not acceptable for fan support
and may need to be replaced. Consult a qualified electrician if in doubt.
≥6' 11"(2.1 m)
This method is recommended if the ceiling
is sloped or vaulted or if the ceiling is
extra high, requiring a downrod (fig. 5).
Follow steps 1-9, omitting step 2 in the
manual.