One for All Essential 6 URC3660 Mode D'emploi page 7

SETUP
SIMPLESET
4.
5.
6.
7.
• If you find one or more keys do not work as you expect, start again at
step 2 – the remote will start with the next code in the memory.
SETUP BY CODE
If the brand of your device is not listed in the SimpleSet feature, you
can set up by trying codes individually. To do this, firstly locate your
brand in the Code List. Codes are listed by brand and device, and in
order of popularity.
1.
2.
3.
4.
5.
6.
7.
* Note: If your original remote did not have a Power key, try testing
with a different key at step 6. For example try pressing Play or Pause
when setting up a streaming box and see if the box responds.
712822 Essential-6 CAN_Manual URC3660 RDN1111220 incl. Codelist.indd 7 712822 Essential-6 CAN_Manual URC3660 RDN1111220 incl. Codelist.indd 7
Hold down the digit key for your brand and device
as listed in the tables above - e.g. 3 for an LG TV.
The remote will send a Power command every 3 seconds, but
if your device does not have a Power function (for example a
streaming box like Apple TV) the remote will send the Play/
Pause function.
As soon as your device reacts by turning off or Pausing
(Streaming box only) release the digit.
The LED will blink twice and the remote should now operate
your device.
Turn on your device (not on standby) and point the Essential
remote towards it.
Press the Device key you wish to set up (for
example TV)
Hold down the SETUP key until the LED under the
Device key blinks twice
Enter the first 4 digit code listed for your brand (e.g.
1840 for LG).
The LED will blink twice on the last digit of the code.
Now aim the remote towards your device and press
the Power key.*
If the device turns off your remote is ready to use. If not, repeat
steps 2-6 with the next code in the list.
7
11-12-2020 12:07 11-12-2020 12:07