Mode of Operation
b. Switch Value Cyclic HKL Signal/2:
c. Switch Value Cyclic HKL/1:
d. Switch Value Cyclic HKL
Indication Constant Light/1:
All applications can be run on the device combinations 6134-74-500/6120-101-500 and 6131-
74-500/6110-500.
5.7 Constant Light Control
If the Presence Detector is employed as a constant light controller, use the parameter
setting under the "Constant Light" tab in the ETS application. By means of the communi-
cation object "Set reference value", the currently set brightness value can be accepted via
the 1-bit instruction (switch). For more precise details regarding possible settings of the
Presence Detector, please refer to the "Twisted Pair" (TP) Technical Manual and/or the
"Constant Light Control" Manual.
This application comprises the functions
2 x "Presence" and "Signal"
This application comprises the functions
2 x "Presence" and "HKL"
This application comprises the functions
"Presence", "HKL", "Indication" and "Constant
Light Control"
GB
66