Carromco EVOLUTION-XT Instructions D'assemblage page 11

05803, 05804
WARNING! Not suitable for children under the age of 36 months due to small parts and small
balls, which could be swallowed or inhaled by young children. Choking hazard! To be assembled
by an adult. Children should play with adult supervision only. Please retain this information.
Proper use of this table game can avoid damage or injury!
Congratulations on the purchase of your new "CARROMCO" Table Game!
We hope you will have many hours of fun with family and friends with this product. Please
ensure that you keep your Instruction Manual for future reference! Please also note your model
number (as detailed on the front page of this manual and also located on the barcode panel of
the colour label on the front apron of the carton packaging) as this information is necessary
should you need to contact us with any product queries.
Prior to assembly of this table game please read through the Instruction Manual carefully
and familiarize yourself with all product parts, assembly steps, and guidelines. We would
recommend that you assemble this table game with two adults as assembly will be much
easier due to size of product. Please refer to the Parts Identifier on the following pages, and
be sure that all table game parts are included.
PLEASE NOTE - If you are missing a part, or if you have any questions, please do not return the
table to the store, please call or contact the Customer Service Centre (+49 (0) 1805 25 63 63,
service@carromco.com) and we will endeavour to assist with any queries that you may have.
TOOLS REQUIRED FOR ASSEMBLEY

1 x Philips Screwdriver

1 x L-Shaped Tool (included)
THE EVOLUTION-XT APPLICATION
PREPARATIONS
1. Activate the Bluetooth Function and location service on your Smartphone or Tablet.
2. Download the APP "Evolution-XT" from Google Play or Apple App Store.
3. A) Open the battery compartment of the BT module on the side of the table. Insert 3x AA
batteries with correct polarity and close the battery compartment again.
3. B) Alternatively the BT module can also be powered via the built-in Micro-USB jack. This
requires a standard USB-Cable and a standard 5.0V 500mA USB plug (not included)
4. Use ON/OFF switch to active the BT module. The indicator LED turns red if powered.
5. Start the App from your Smartphone or Tablet; it connects automatically, no manual pairing
necessary.
6. The Status indicator on the top bar of the screen changes from "...pairing" to "Connected".
The indicator LED turns green if BT connection is established.
ENGLISH