Symbols Used In The Manual; Symbols Used On The Machine And Battery Charger - Fimap Broom Manuel D'utilisation Et D'entretien

The descriptions contained in this document are not binding. The company therefore reserves the right to make any modifications at any time
to elements, details, or accessory supply, as considered necessary for reasons of improvement or manufacturing/commercial requirements.
The reproduction, even partial, of the text and drawings contained in this document is prohibited by law.
The company reserves the right to make any technical and/or supply modifications. The images are shown as a reference only, and
are not binding as to the actual design and/or equipment.

SYMBOLS USED IN THE MANUAL

Open book symbol with an "i":
indicates the need to consult the instruction manual.
Open book symbol:
tells the operator to read the manual before using the appliance.
Covered place symbol:
the operations preceded by this symbol must always be carried out in a dry, covered area.
Warning symbol:
carefully read the sections marked with this symbol and observe the indications, for the safety of the operator and the
appliance.
Protective gloves symbol:
always wear protective gloves, to avoid the risk of serious injury to your hands.
Tool symbol:
indicates the need to use tools not included in the supply.
Lifting point symbol:
located on the front and rear of the appliance, to indicate the lifting points.
Explosion risk symbol:
indicates that the battery may explode in certain conditions, if not handled in accordance with the directives indicated in
the manufacturer's manual.
Disposal symbol:
carefully read the sections marked with this symbol for disposing of the appliance.
Recycling symbol:
carefully read the sections marked with this symbol for recycling the appliance.

SYMBOLS USED ON THE MACHINE AND BATTERY CHARGER

Main switch symbol:
located on the central rear part of the appliance, to indicate the main switch.
Battery symbol:
used on the left side of the appliance, to indicate the position of the battery.
"OPEN" symbol:
used on the rear of the appliance, to indicate the position of the debris hopper uncoupling button.
"Power" symbol:
used in the battery charger base, to indicate the green LED. This LED shows when the electric circuit is operating.
"Charging" symbol:
used in the battery charger base, to indicate the red LED. This LED shows when the battery is recharging.
13