emerio TFN-114529 Mode D'emploi page 7

4. Swing: Press the swing button
be on and off accordingly.
5. Timer: Press the timer button
(Repeating). When the set time has elapsed, the fan will be off and under standby condition.
CARE AND CLEANING
CAUTION: ALWAYS UNPLUG THE PRODUCT FROM THE ELECTRICAL OUTLET PRIOR TO CLEANING IT or may cause
electric shock or product damage.
If there is too much dust or dirt on the front grid cover and wind wheel of the fan, the performance of air-out
would be affected, so we suggest clean the appliance once per month at least.
The appliance should be cleaned at least by every other month:
How to clean the wind wheel:
1) Press the "PUSH" button to take out the air inlet grill (a) (fig. 1);
2) Hold the wind wheel (b), at the same time, rotate the nut (c) in the "LOOSEN" direction and then lift the wind
wheel to take it out (fig. 2)
3) Wipe or wash the wind wheel (b) directly in water; do not use sharp or abrasive cleaning agents.
4) Airing and protect the wind wheel (b) well;
5) Install the wind wheel (b) back to the appliance, tighten the nut (c) in the "TIGHTEN" direction. Install the air
inlet grill (a) back (fig. 3), make sure it locked well otherwise the appliance cannot be turned on.
Fig. 1
How to clean the surface of the appliance:
1. Wipe the surface of the appliance with a damp cloth.
2. Do not use any solutions to clean the appliance.
3. Store the product in a cool, dry place.
to control the oscillation function on and off. The display of
to set your desired working time from 0h →1h →2h →4h →8h → 0h ...
Fig. 2
- 6 -
Fig. 3
will