Technical Data; Label Data And Markings - GIESSE VARIA SLIM RADIO Manuel D'utilisation Et D'installation

The VARIA SLIM RADIO actuator is packed in one single carton. Each package
contains:
• Actuator with 2 metre (±5%) lead.
• Standard support brackets with distancer (A).
• Bracket for vertical assembly of the actuator (B).
• Bracket for transom window (C).
• Bracket for outward opening fixture (D).
• Template for boring.
• Instruction manual.

5. Technical data

MODEL
Force exerted by thrust and traction (F
Strokes (S )
V
Power supply voltage (U
Rated absorbed current (I
Current consumption with no charge
Charge absorbed at nominal load (P
No load speed
No load duration (400 mm)
Electrical insulation
Type of service (D
Working temperature
Protection index
Adjustment of socket at casing
Holding nominal force (it can vary according
to the chosen brackets)
Connection of two or more devices in
parallel
Limit switch stop at opening
Limit switch stop at closure
Dimensions
Weight
Any information reported in this table is not binding and may be susceptible to variations without

6. Label data and markings

The VARIA SLIM RADIO actuators have CE marking and comply with the
Standards listed in the Declaration of Conformity. They also come with a
Declaration of Incorporation, due to their classification by the Machinery Directive
as "partly completed machines". Both declarations are included in the final pages
of this manual.
The plate data is displayed on an adhesive label placed on the outside of the
casing, which must remain intact and visible.
)
N
)
N
)
R
)
N
100, 200, 300, 400 mm
)
N
Electronic by means of dip-
At absorption of charge
notice
34
VARIA SLIM RADIO
300N
110-230V~ 50/60 Hz
0,31A - 0,24A
0,084A - 0,042A
23-27W
15,7 mm/s
25 s
Class II
2 cycles
- 5 + 65 ºC
IP30
Autopositioning
1600 N
YES
switches
386,5x59x37
1,000 kg