Sleep Timer; Alarm Clock - Kenwood CR-ST100S Mode D'emploi

13. Sleep timer

With this function you can switch the radio to standby mode automatically after a set period of time.
You can choose between 15, 30, 45 or 60 minutes, "Sleep OFF" deletes the previously set period
of time. To do this, press the <MENU> button while the audio source is selected and select "Main
menu". Use the <UP> or <DOWN> to navigate in the menu and select "Snooze". Use the <UP> or
<DOWN> button in the"Set snooze time" menu to select the desired time period and confirm with
the <OK> button. Exit the menus again with the <MENU> button. Alternatively, you can use the
<Z > button on the remote control to set the time period.
ZZ
The remaining time is shown in the bottom left of the display, with minutes running backwards.

14. Alarm clock

This radio has 2 individually adjustable alarm times. Press the <ALARM> button on the remote cont-
rol and select"Alarm 1" or "Alarm 2" to make the settings.
Alternatively, you can also call up the alarm clock from the main menu. In addition, a setting on the
radio is possible using the <ALARM> button and the <NAVIGATE> knob. In standby mode, the
saved alarm clocks of the <ALARM> button can be activated and deactivated. The following options
are available for programming the alarm clock:
14.1 Enable:
Select here on which days the alarm should be activated. The following selection is available:
Off/Daily/Once/Weekend/Weekdays
Select "Off"to deactivate an activated alarm clock.
14.2 Time:
Set the hours first with the <UP> or <DOWN> buttons and then the minutes after pressing the
<OK> .
14.3 Mode:
Here you set the audio source with which you want to wake up. The following selection is available:
Buzzer / Internet radio / DAB / FM
14.4 Preset:
The station with which to wake up is specified here. The station last listened to or the stations saved
in the favourites are available here. Does not apply to buzzer mode.
14.5 Volume:
Set the desired alarm volume here.
20