Station List - Kenwood CR-ST100S Mode D'emploi

9.3 Station list

Press the <MENU> button and confirm "Station list" with <OK>. Use the <UP/DOWN> buttons
or the <NAVIGATE> knob to select a station and press <OK> to confirm. The device starts playing
automatically.
Note: The reception quality of a station depends on factors such as weather, installation location
and antenna orientation. If a station from the station list cannot be received, change the orientation
of the antenna or the location of the radio. Stations that can no longer be received can be removed
from the station list.
9.4 Delete stations that can no longer be received
Stations that can no longer be received can be deleted from the list. To do this, press the <MENU>
button and select "Prune invalid". Under "This removes all invalid stations, continue?" select
"YES" and these stations will be deleted. Selecting "NO" takes you back into the menu without
deleting the stations.
9.5 Favourites (memory locations)
20 memory locations (favourites) are available for storing DAB+ stations.
9.5.1 Storing DAB+ stations on the direct selection buttons 1-5 on the radio:
On the radio, you can assign memory locations 1 - 5 using the number keys. To do this, select the
desired station and press a number key until "Preset stored" appears on the display. The memory
locations can be called up by pressing the button briefly.
9.5.2 Storing DAB+ stations with the remote control:
Memory locations 1–10 can be assigned using the number buttons on the remote control. To do this,
select the desired station and press a number key on the remote control until "Preset stored" appe-
ars on the display. The memory locations can now be called up by pressing the remote control briefly.
9.5.3 Saving DAB+ stations in memory locations 11 - 20:
Select the desired station and hold down the <FAVORITE> button on the radio or <FAV> on the
remote control. Now select a memory location from the list of station memories and confirm the
selection with the <NAVIGATE> button on the radio. The "Preset stored" appears on the display.
You can easily call up the memory locations by briefly pressing the <FAVORITE> button on the radio
or <FAV> on the remote control. Use the <UP/DOWN> buttons or the <NAVIGATE> knob to select
a station and press <OK> to confirm.
Note: The memory locations cannot be deleted, but can only be overwritten with other stations.
16