KBSOUND eisSOUND PLUS 42695 Mode D'emploi page 9

8
4.5 Storing and Clearing Station Frequencies Automatically
To activate the storing station frequencies automatically
While the key is held down, the LED will be RED. Once the operation to scan stations has
The control unit will store into memory the stations that are received with the highest
quality, ordered from lowest frequency (87.5 MHz) to highest frequency (108.0 MHz).
The system will use all the memory slots available, reaching the maximum of 20.
The process can take a few moments. Once the scan has been completed or once the
maximum number of memory slots has been used, the process ends and a long BEEP
To activate the clearing station frequencies automatically
4.6 Adjusting Station Search Sensitivity
To adjust the automatic station search sensitivity (see 4.1. Station Search), hold down the
1 and 3 keys (1=minimum, 3= maximum) for 5". While the key is held down, the LED
will be RED. A BEEP sound signal will indicate that the new level of sensitivity has been
process, hold down key 9 for 5".
begun, the LED will alternately flash between GREEN and RED.
process for all the memory slots,
Key Sequence
signal sounds.
hold down 6 key for 5".
correctly stored.
Sound Signal
9
BEEP
5''
PRG all
6
BEEP
5''
DEL all
BEEP
1
5''
2 BEEP
5''
3
BEEP
5''
CC-1088-05.1