KBSOUND eisSOUND PLUS 42695 Mode D'emploi page 8

4.3 Tuning to FM Memory Pre-Sets
The MEM+/MEM- keys allow you to scroll through the stations stored in memory (see
Chapters 2.6 and 2.7, Storing and Clearing Stations in Memory).
When stations are stored in memory they are sorted in ascending order; that is, beginning
When memory n# 1 is called up, the typical BO-BEEP audio signal sounds.
If there are no stations stored in memory, the sound signal and LED will be the same as
4.4 Storing and Clearing Station Frequencies Manually
To store a station in memory
4.2. Directly Keying Station Frequency). Hold down the FM key for 2". The station tuned
If all the memory slots have been assigned, the current station will not be able to be
stored and the sound signal and LED will be the same as when there is an error.
To delete a station from memory
station tuned at that time will be cleared from memory if it was previously stored.
If the station you wish to clear from memory was not previously stored in the memory, the
sound signal and LED will be the same as when there is an error.
with 87.5 and ending with 108.0.
, tune to the station (see Chapters 4.1. Station Search and
at that time will be stored in the memory.
, select the station and hold down the C key for 2". The
Key Sequence
when there is an error.
Sound Signal
MEM
BO BEEP
MEM
BEEP BEEP BEEP BEEP
MEM
2'' BEEP
FM
PRG mem
BEEP BEEP BEEP BEEP
2''
FM
PRG mem
C
BIP
2''
DEL mem
C BEEP BEEP BEEP BEEP
2''
DEL mem
CC-1088-05.1
7
ENG