KBSOUND eisSOUND PLUS 42695 Mode D'emploi page 10

5. Selecting Turn-On Mode
1. Supply power to the KBSOUND®PLUS
2. The KBSOUND®PLUS unit will flicker a couple of times and turn off.
3. Turn on the KBSOUND®PLUS
4. With the KBSOUND®PLUS
for 5".
If the Turn-On mode is set
to "on", the RED light will
flash once. In this state,
when power is fed to the
unit, it will turn on in
"ideal" mode (see Chapter
6. "Ideal Mode").
If the Turn-On mode is set to "off", the RED light will flash four times. In this state,
when power is fed to the unit, it will turn on in "off" mode.
This function is designed for use in the
event that the KBSOUND®PLUS
power supply is fed by a specifically
designated switch. In this case, the
automatic activation mode must be
programmed in order to automatically
turn on the KBSOUND®PLUS
when the switch is activated.
These steps must be followed:
unit by flicking the switch.
unit using the remote control (ON/OFF key).
unit turned on, keep the ON/OFF key pressed down
Key Sequence Sound Signal
5''
9
ENG
unit
BIP
CC-1088-05.1