Télécharger Imprimer la page

Station Search - KBSOUND eisSOUND PLUS 42695 Mode D'emploi

Table des Matières

Les langues disponibles

4. Operating the FM Tuner

4.1 Station Search

When the search is going "up" the tuner, a BO BEEP signal sounds when the end of the

frequency range is reached. The next press of the key will start the search from the

When the search is going "down" the tuner, a BO BEEP signal sounds when the beginning

of the frequency range is reached. The next press of the key will start the search from the

4.2 Directly Keying Station Frequency

To directly key in an FM station frequency, sequentially press the numeric keys of the

station frequency then press the FM key. For example, to select 94.7, press 9 4 7 FM.

Each correctly entered digit will be followed by a BEEP sound signal and a RED LED flash.

Note: A station frequency can be keyed in as either 94.7 (9 4 7 FM) or as 94.70 (9 4

If the frequency keyed in is not correct or if more digits than necessary are keyed in, the

To clear a digit keyed in and start keying in a different frequency, press the C key and

While the search is taking place, the LED will be RED.

Once the station has been found, the LED turns GREEN.

beginning of the frequency range (87.5 MHz).

end of the frequency range (108.0 MHz).

error will be noted with a BEEP-BEEP-BEEP-BEEP type signal.

then begin keying in the desired frequency.

Key Sequence

SCAN

7 0 FM).

Sound Signal

BEEP

BEEP BEEP BEEP BEEP

BIP

BIP BIP BIP BIP

BIP

CC-1088-05.1

Table des Matières

Eissound plus 42695u