Video Output; Display Setting - Onkyo BD-SP353 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
• [Connection Test]
Display network connection message.
• [IP Setting]
{Auto} – Auto obtain network information.
{Manual} – Manual setup network
information.
• [BD-Live Connection]
{Permitted} – During playback BD-Live disc,
the disc may automatically downloading all
information from appointed network.
{Partial Permitted} – During playback BD-
Live disc, the disc may automatically
downloading the part of information from
appointed network.
{Prohibited} – Disable downloading
information from network.

Video Output

1. Press HOME MENU.
[General Setting] menu is displayed.
2. Press ► to select [Video Output], then
press ▼.
3. Select an option, press ► to access.
Video Output

Display Setting

TV Aspect Ratio
Video Resolution
Color Space
HDMI Deep Color
Use cursor key to move focus, use "Enter" key
to select
Exit
4. Press ▲/▼ to select a setup option and
press ►.
5. Select the setting you wish to change
and press OK to confirm.
- Press ◄ to return to the previous menu.
- Press HOME MENU to exit the menu.
Display Setting
• [TV Aspect Ratio]
Select Video output Aspect Ratio according
to your TV's spec.
{16:9 Full} – Select this when connecting to a
wide (16:9) TV.
{16:9 Normal} – Select this when connected
to a wide (16:9) TV. 4:3 pictures are displayed
with vertical black bars along the sides.
32
16:9
720p
YCbCr422
Off
Return
{4:3 Pan&Scan} – Select this when
connecting to a 4:3 screen TV and playing a
16:9 video. The video will be played with the
left and right sides of the image cut off to
display on the 4:3 screen. (This function works
if the disc is labeled for 4:3PS.)
{4:3 Letterbox} – Select this when connecting
to a 4:3 screen TV and playing a 16:9 video.
The video will be played with black bands at
the top and bottom.
• [Video Resolution]
Select a video output resolution that is
compatible with your TV display capability.
You can change the resolution by using the
HDMI button on the remote control. The
resolution changes each time the HDMI button
is pressed.
{Auto} – Select the most suitable resolution
according to the input video. You can enjoy
Blu-ray Discs and also videos on DVD with
great picture quality using the Upscaling
function.
{480p/576p}, {720p}, {1080i}, {1080p},
{1080/24p} – Select a video resolution setting
that is best supported by the TV. See TV
manual for details.
Note:
• When 1080/24p is selected, the movement
may be unnatural or the picture unclear,
depending on the contents being played
back. In such cases, set the resolution to
something other than 1080/24p.
• [Color Space]
Select a predefined color space of picture.
{RGB} – Select this to output the video
signals as RGB signals. Choose FULL RGB if
the colors seem too dense and all the dark
colors are displayed in a uniform black when
RGB is selected.
{YCbCr444} – Select the video output
YCbCr4:4:4 color space.
{YCbCr422} – Select the video output
YCbCr4:2:2 color space.
{Full RGB} – Select this to output the video
signals as RGB signals. Choose this if the
colors seem too faint and the black seems too
bright when FULL RGB is selected.
• [HDMI Deep Color]
This feature is available only when the display
device is connected by a HDMI cable, and
when it supports deep color feature.
{Auto} – Select when you want to
automatically output the optimal bit color.
{Off} – Output standard 24 bit color.

Publicité

Table des Matières
loading

Table des Matières