Connecting A Tv; Connecting An Av Receiver Or Amplifier - Onkyo BD-SP353 Mode D'emploi

Connecting a TV

See Connecting an AV receiver or amplifier
below to connect an AV receiver or amplifier
using an HDMI cable.
Notes:
• Hold the plug when connecting and
disconnecting the cable.
• Placing a load on the plug could result in
faulty contact and no video signals being
output.
To HDMI
input terminal
TV
14
Rear panel
Match the direction
of the plug to the
terminal and insert
straight.
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable.
Direction of signal flow

Connecting an AV receiver or amplifier

Connect to an AV receiver or amplifier in order
to enjoy the surround sound of Dolby TrueHD,
Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution
Audio, DTS Digital Surround, LPCM or AAC.
For instructions on connecting the TV and
speakers to the AV receiver or amplifier, refer
to the operating instructions for AV receiver or
amplifier.
Notes:
• Hold the plug when connecting and
disconnecting the cable.
• Placing a load on the plug could result in
faulty contact and no video signals being
output.
Rear panel
To HDMI
input terminal
AV receiver
or amplifier
From HDMI
output
terminal
Match the direction
of the plug to the
terminal and
insert straight.
To HDMI input
terminal
TV
Direction of signal flow