User Interface Description - Sensica Sensilift STG100EU Mode D'emploi

User interface description

1. ON/OFF and energy selection button - A gentle touch on the
button (after the device is connected to the power supply) will turn
the device ON at energy level 1, shown by 1 illuminated light in the
energy level display. Once it reaches the highest level, another
gentle touch will turn the device OFF. The device will switch to
standby mode when left unattended for 1 minute.
2. Status indicators
Status
Indicator
RF energy level
selection touch
button
Massage level
selection touch
button
The device is on Stand-by
mode.In case of no light, make
Blinking yellow
sure the power cord is
light
plugged-in properly.
The device is in Treatment
Steady green
mode. RF is activated, skin
light contact is detected and the
treatment is undergoing.
The device is in Error mode.
Blinking
the device detected a
alternating
malfunction and prevents the
green and
activation of the RF and
yellow lights
massage functions.
Green light on, indication of RF
energy level. Touch the RF
1-3 energy
energy level selection button
levels lights
repeatedly until you reach the
desired level: 1, 2, 3 or off.
Green light on, indication of
massager function level. Touch
1-2 massage
the massage level selection
level lights
button repeatedly until you
reach the desired level: 1, 2, or
off.
11