User Interface Description - Sensica Sensilift Mode D'emploi

User interface description

1. ON/OFF and energy selection button - A gentle touch on the
button (after the device is connected to the power supply) will
turn the device ON at energy level 1, shown by 1 illuminated
light in the energy level display. Once it reaches the highest
level, another gentle touch will turn the device OFF. The
device will switch to standby mode when left unattended for
45 seconds.
2. Status indicators
Blinking yellow
light
Steady green
Status indicator light
Blinking
alternating
green and yellow
lights
RF energy level
1-3 energy levels
selection touch
lights
button
Massage level
1-2 massage
selection touch
level lights
button
The device is in standby mode.
In case of no light, make sure the
power cord is plugged-in properly.
The device is in treatment mode.
RF is activated, skin contact is
detected, and the treatment is
undergoing.
The device is in error mode. The
device detected a malfunction
and prevents the activation of the
RF and massage functions.
When the green light is on, it
indicates that the RF energy is
active. Touch the RF energy level
selection button repeatedly until
you reach the desired level: 1, 2,
3 or off.
When the green light is on, it
indicates that the massage
function is active. Touch the
massage level selection button
repeatedly until you reach the
desired level: 1, 2, or off.
11