User Instructions; Preliminary Test - Sensica Sensilift Mode D'emploi

User Instructions

The device is intended for use
on: cheeks, nasolabial "smile"
folds, "crow's feet" (next to your
eyes), forehead, chin, allowed
areas of the neck, décolletage
and hands.
What to Expect
During your treatment, it is
normal to experience:
• Sensations of warmth
created by the RF energy.
• Some mild red or pink color
on the skin – during and
just after each treatment.

Preliminary Test

The preliminary test is intended
to determine your skin's reaction
to the treatment and help you
find the optimal settings for
each treatment area.
Perform a preliminary test on
each area you intend to treat
48 hours prior to the first full
treatment.
• Prepare your skin as
described below in
Step 1: Prepare your skin.
Instructions for operating
the device can be found
below in Step 2: Device
operation.
12
• Before using the device,
apply an even layer of the
Base Gel on the treatment
area.
• Start your test with energy
level 1 and massage level
1 and move the device in
small circular motions.
• Increase the energy and
massage levels according
to your comfort. Stop
the test if you do not feel
comfortable or if you see
adverse effects.
• Perform the preliminary
test for a total time of
about 3 minutes.
• Wait 48 hours and examine
the tested area.
• If the skin in the tested area
appears normal and no
adverse effects are present,
you can proceed with a full
treatment at the highest
comfortable energy level
that you tested.
Note: You may select any
RF energy level that you find
comfortable. The RF energy
level indicates the rate at
which the temperature rises
when in heating mode. A high
RF energy level will enable