Recommended Treatment - Sensica Sensilift STG100EU Mode D'emploi

4. The activation of either RF or
massage functions can be
done independently or
together. Both functions will
be activated at level 1.
Select different levels based
on the preliminary test.
5. Sensilift is equipped with 2
safety sensors which will
keep the temperature in the
effective and safe range
during the whole treatment.
6.
Place the treatment fingers
on the intended area,
ensuring full contact with
your skin during the entire
treatment. Sensilift will
indicate the proper skin
contact by the green status
light. If Sensilift is not
properly placed, the RF
energy will not be delivered.
7. If you do not feel sensations
of warmth after
approximately 10 seconds,
try moving Sensilift on a
smaller treatment area,
and/or increasing the RF
energy.
8. Move the device on the
treated area in slow circular
or back and forth motion
while constantly and firmly
contacting the skin.
14
9. See treatment areas,
treatment time and
treatment schedule in the

"Recommended Treatment

Protocol" chapter.
10. After completing the
treatment, wipe off the
remaining "Gel Base" from
the treated area.
11. Cleaning instructions for
before and after are
depicted in the Cleaning
chapter.
Recommended Treatment
For long-lasting results, use
the device once a week on
each desired area for a
•
period of 8 weeks.
Response to the treatment
differs between individuals
and depends on
•
environmental and biological
factors, heredity and aging.
To sustain optimal long-term
results, maintenance
treatments may be
performed as needed every
•
4-8 weeks.