Post Facial Treatment Care; Cleaning & Storage; Troubleshooting - Sensica Sensilift STG100EU Mode D'emploi

Post facial treatment care

•
We recommend you also use
Sensica's anti-aging cream
to increase treatment
efficacy and ensure
long-lasting results
(available for purchase at
www.sensica.com).
•
Apply a high-factor
sunscreen (at least 30 SPF)
and protect the treated
area from sunlight for two
weeks following treatment.
•
Following the treatment,
avoid any usage of hot
water on your face and
discontinue usage of
abrasive or harsh products
for two days.
•
Makeup may be applied
immediately after treatment.
Cleaning & Storage
•
Make sure to turn off and
unplug the device before
cleaning.
It is recommended to clean
•
the device, especially the
treatment fingers,
temperature sensors, and
silicone cover, of residual
from the Base Gel with a soft
damp cloth or paper towel.
Do not rinse the device
under running water, as
it may cause device
malfunction.
• Keep the device dry. Never
place, store or use the
device near bathtubs,
showers, basins or other
vessels containing water as
this may cause severe
electrocution.

Troubleshooting

If you experience any
problems with your Sensilift,
please refer to the information
below to try to resolve it:
•
If the device does not turn on:
a. Make sure that the power
cord is plugged properly
into the electrical outlet
and into the device power
socket.
b. Make sure the power
outlet has power.
•
If the device does not deliver
RF energy, meaning that you
cannot feel the warm
sensation, be sure to:
Verify there is full contact
with the skin and that the
Base Gel was applied
properly on the skin. The RF
17