Jonsered GT 2228 Manuel D'utilisation page 11

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mixing
Always mix the gasoline and oil in a clean container
intended for fuel.
Always start by filling half the amount of the gasoline
to be used. Then add the entire amount of oil. Mix
(shake) the fuel mixture. Add the remaining amount of
gasoline.
Mix (shake) the fuel mixture thoroughly before filling
the machine's fuel tank.
Do not mix more than one month's supply of fuel at a
time.
If the machine is not used for some time the fuel tank
should be emptied and cleaned.
This engine is certified to operate with XQOHDGHG
gasoline.
WARNING! The catalytic converter
!
muffler ets very hot during and after
use. This also applies during idling. Be
aware of the fire haza d, especially when
working near flamma le substances and/
or vapors.
FUEL HANDLING
Fueling
!
If you have spilled fuel on it. Wipe off the spillage and
allow remaining fuel to evaporate.
Clean the area around the fuel cap. Contamination in
the tank can cause operating problems.
Ensure that the fuel is well mixed by shaking the
container before filling the tank
11
WARNING! Taking the following
precautions, will lessen the risk of fire
Mix and pour fuel outdoors, where there
are no sparks or flames
Do not smoke or place hot objects near
fuel.
Always shut off the engine before
refueling.
Always stop the engine and let it cool for
a few minutes before refueling.
When refueling, open the fuel cap slowly
so that any excess pressure is released
gently.
Tighten the fuel cap carefully after
refueling.
Always move the machine away from the
refueling area and source before
starting.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gts 2228A05328ccjnA05328csjn

Table des Matières