Playing An Ipod/Usb Device; Playing A Bluetooth Device - Sony XAV-712HD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To change the audio channel
When playing a VCD, you can listen to both left and
right channels, right channel only or left channel
only, via both right and left speakers.
During playback, touch
desired audio channel appears.
The options are indicated below.
[Stereo]: Standard stereo sound (default)
[1/Left]: Left channel sound (monaural)
[2/Right]: Right channel sound (monaural)

Playing an iPod/USB Device

In these Operating Instructions, "iPod" is used as a
general reference for the iPod functions on the iPod
and iPhone, unless otherwise specified by the text
or illustrations.
For details on the compatibility of your iPod, see
"About iPod" (page 36) or visit the support site on
the back cover.
MSC (Mass Storage Class)-type USB devices (such as
a USB flash drive, digital media player, Android
phone) compliant with the USB standard can be
used.
Depending on the digital media player or Android
phone, setting the USB connection mode to MSC is
required.
1
Reduce the volume on this unit.
If the device is turned off, turn it on.
2
Connect the iPod or the USB device to
the USB port.
3
Press HOME, then touch [USB Music],
[USB Video], [USB Photo] or [iPod].
In the case of [USB Music], [USB Video] or [iPod],
playback starts.
In the case of [USB Photo], touch [All pictures] or
[Folders], then select the picture or folder to
start photo file playback.
To stop playback
Press and hold OFF for 1 second.
To remove the device
Stop playback, then disconnect.
Do not disconnect during playback, as data in the
device may be damaged.
Notes
 If you connect an iPod or MSC device to a USB port
while the same type of device is already connected to
the other USB port, the unit will not recognize the
latest device.
 The signal of USB Video or USB Photo playback is not
output from the video output terminal (rear).
 The signal of iPod video playback is not output from
the video output terminal (rear).
repeatedly until the
Caution for iPhone
When you connect an iPhone via USB, telephone
volume is controlled by the iPhone itself. In order to
avoid sudden loud sound after a call, do not
increase the volume on the unit during a call.
About resuming mode
When the iPod currently playing is connected to the
dock connector, the mode of this unit changes to
resuming mode and playback starts in the mode
set by the iPod.
In resuming mode, repeat/shuffle play are not
available.
Listen and watch contents with direct
operation of iPod (Passenger App
Control)
1
During playback, touch
To deactivate Passenger App Control
During [Passenger App Control], touch screen and
then [Cancel].
The play mode changes to resuming mode.
Notes
 App image and video can only be displayed on this
unit while the parking brake is applied.
 Apps compatible with Passenger App Control are
limited.
 The volume can be adjusted only by this unit.
 The repeat and shuffle settings will be off if the
Passenger App Control mode is canceled.

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make BLUETOOTH connection with the
audio device (page 9).
2
Reduce the volume on this unit.
3
Press HOME, then touch [BT Audio].
4
Operate the audio device to start
playback.
5
Adjust the volume on this unit.
.
15
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Xav-602bt

Table des Matières