Appendix; Troubleshooting - Abus eyseo. TV7230 Instructions D'installation

Appendix

A. Troubleshooting
Status LEDs
Condition / LED Color
Network failed
After successful network
connection
Audio mute
During firmware upgrade
Restore settings
Resetting and restoring
At the back side of the netzwork camera is a button. Press this button to reset the system or restore
the factory parameter settings. Sometimes the normal system status can be restored by a reset. If you
have further problems following a reset, restore the factory parameter settings and reinstall and
reconfigure the system.
RESET:
Press the reset button with a pointed object.
RESTORE:
1. Press the button continuously.
2. Wait for all LEDs blink fast.
3. Release the reset button.
Green
Off
1/s
2/s
0.1/s
On
36
Blue
On
On
On
1/s
0.1/s
If the factory parameter
settings are restored, all the previous
settings are deleted. The system can
be reset or restored.
Red
Off
On
On
On
On