Sharp LL-T1520 Mode D'emploi page 21

Adjusting the screen display
COOL ... Color tone bluer than standard
• ......... Color tone slightly bluer than standard
STD ...... Color tone standard setting
• ......... Color tone slightly redder than standard
WARM .. Color tone redder than standard
USER
R-CONTRAST .....
G-CONTRAST .....
B-CONTRAST .....
HUE
Hue can be adjusted. (
SATURATION
Color saturation can be adjusted. (
At the minimum value, the screen is black and
white.
button for blue-green
button for red
button for purple
button for green
button for yellow
button for blue
buttons)
buttons)
(When using an analog signal)
MODE SELECT Menu
MODE SELECT
OSD H-POSITION
OSD V-POSITION
SCALING
400 LINES
LANGUAGE
INPUT-1 ANALOG
1024 x 768 V : 60Hz
Notes:
- Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option:
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to
the left and right. (
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. ( buttons)
SCALING (Level of scaling)
Adjusts the image to optimum sharpness when
Screen expansion is taken. (
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc. (
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Notes:
- As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
LANGUAGE
Messages displayed on the screen and OSD Menu
contents can be changed to the following lan-
guages.
English, German, French, Dutch, Spanish,
Italian, Swedish, Japanese
1.After selecting [LANGUAGE], press the
The Language Selection Menu will be displayed
on the screen.
2.Select the desired language using the SELECT
button.
3.Press the MENU button.
The Language Selection Menu disappears.
21
3
640 720
H : 48.4kHz
SELECT button
buttons)
buttons)
buttons)
button.