Remembering Function (Ce2974N/Ce2974Nt); Manual Stop Turntable Function - Samsung CE2974N Mode D'emploi Et Conseils De Cuisson

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Remembering Function (CE2974N/CE2974NT)

This oven remembers the last cooking power level for your
GB
convenience.
1. Set the add some cooking time by turning the dial knob.
2. Press the
When cooking is over, the end reminder signal will beep 3
times.(Chime bell per 1min). And then, cooking mode will be
"RESET" and the oven will forget the last cooking mode.
If there's no operation after the door is opened and closed
once, the cooking mode will be "RESET" after 30 seconds.
Press the Cancel(
"RESET".
button.
) button and then cooking mode will be

Manual Stop Turntable Function

The turntable on/off(
) button enables you to use large dishes which
fill the whole oven by stopping the turntable from rotating.
The results will be less satisfactory in this case as the cooking is
less even. We recommend that you turn the dish by hand halfway
through the cooking process
Warning! Never operate the oven without local when turntable
button is off.
This condition may cath fire and extre damage the
Result:
oven.
Model : CE2974N/CE2974NT
1. Press the Turntable on/off(
Result:
2. To switch the turntable rotating back on, press the
Turntable on/off(
Result:
Don't press Turntable on/off(
The turntable doesn't rotate when the lamp is "ON".
Model : CE2914N/CE2914NT
Push the Turntable on/off(
Result:
Don't press Turntable on/off(
22
) button.
The following indication is displayed.
The turntable will not rotate.
) button again.
The turntable will rotate.
) button during cooking process.
) button.
If the turntable button can be pressed, it will
rotate. If the turntable button pop, it will not
rotate.
) button during cooking process.

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Ce2974ntCe2914nCe2914nt

Table des Matières