Gigaset Euroset 5030 Mode D'emploi page 8

Changing the PIN
You need a PIN to lock and unlock the telephone and to turn
off the baby call function.
¢
F
Security
oB Enter the PIN (default setting: 0000), press the
OK key.
A ... C In the menu, select
B
Press the OK key.
oB
Enter the old PIN (default setting: 0000),
press the OK key.
oB
Enter the new PIN, press the OK key.
oB
Re-enter the new PIN, press the OK key.
Activating/deactivating direct call (baby call)
If a phone number is set for the baby call function, it is
dialled automatically when you press any key (except
L
and ). The telephone does not allow other phone
numbers to be dialled, but incoming calls can be received.
When the direct call function and the telephone lock are
turned on, you will see the set phone number and
display.
¢
F
Security
oB Enter the PIN (default setting: 0000), press the
OK key.
A C
... In the menu, select
B
Press the OK key.
o
Enter the direct call number (up to 32 digits).
B
Press the OK key.
Switching off
F
Press the menu key.
o Enter the PIN (default setting: 0000)
BB Press the OK key twice.
Saving/deleting an emergency number
A saved emergency number ca also be dialled when the
telephone is locked.
¢
F
Security
oB
Enter the PIN (default setting: 0000), press the
OK key.
A ... C In the menu, select
B Press the OK key.
Saving
o
Enter the emergency number (up to 32 digits).
.
Change PIN
F
è
in the
Direct Call .
.
EmergencyCall
6
GB
Deleting
Once an emergency number is saved, it will
appear in the display.
> >
... You can delete the emergency number one
character at a time using the R-key.
B Press the OK key.
Activating/deactivating the telephone lock
The telephone can be locked so that it cannot dial any
phone numbers, including the direct call number. Only a set
emergency number can be dialled. You can continue to
receive incoming calls.
When the telephone is locked, you will see
display.
Activating the telephone lock
¢
F
Security
oB
Enter the PIN (default setting: 0000), press the
OK key.
A C
... Select
Key Lock
B
Press the OK key.
Deactivating the telephone lock
F Press the Menu key.
o Enter the PIN (default setting: 0000).
B
Press the OK key.
Activating/deactivating call duration display
The telephone can show the approximate call duration
in the display (up to 99 min. 59 sec.). If the call duration
display is activated, the time display begins 8 seconds after
the last digit is dialled.
cF18#
Lift handset, initiate function.
0 1
/ 0: deactivate; 1: activate.
Ba
Press the OK key. Replace handset.
Restoring the telephone to the factory settings
You can restore the telephone's default settings.
cF125
Lift handset, initiate function.
0 ... 3 0: Restore all settings (see page 15);
1: Restore only the repertory keys;
2: Delete only external line prefixes;
3: Restore only the network services.
Ba
Press the OK key. Replace handset.
{
in the
in the menu.