Assembly - Rothewald 10059570 Mode D'emploi

5 | Assembly

The Rothewald Paddock Stand is ready for use as soon as you have fitted the specific supports,
depending on which set you choose, into the holes in the arms of the paddock stand and tightened
them slightly with the tommy screws.
The two Rothewald Rear Paddock Stand models are suitable for an inner swing-arm spacing of
270 mm to 360 mm.
The Rothewald Paddock Stand for the front end is suitable for a fork width from 180 mm to 250 mm.
When inserting the front wheel supports and V-adapters, make sure that they are aligned correctly—
see assembly examples.
Otherwise there is a risk that your motorcycle will topple over while you are working on it, or that it
will slip off while lifting or lowering.
19