Vacuum Cleaning; Unpacking; Use As A Hand-Held Vacuum Cleaner - Dirt Devil Dusty 360 Mode D'emploi

3 Vacuum cleaning

3.1 Unpacking

3 Vacuum cleaning
1. Unpack the appliance and its accessories.
2. Check that the contents are complete
(fig. 1) and in perfect condition.
NOTE:
If you notice any transport damage or if
anything is missing, contact your dealer
immediately.

3.2 Use as a hand-held vacuum cleaner

3
4
28
CAUTION:
Always transport or ship the appliance in its
original packaging to avoid damage. Keep
the packaging for this purpose. Dispose of
any packaging material which you no
longer require in accordance with the valid
regulations in your country.
CAUTION:
Use only intact nozzles. Only use the dia-
mond shaped nozzle with its micro-fibre
sleeve attached for sensitive surfaces.
1. Fit the nozzle of your choice by inserting it
into the vacuum cleaner opening so that
you hear it click into place (fig. 3).
- The diamond shaped nozzle with its mi-
cro-fibre sleeve attached (fig. 1/14)
adapts perfectly to the contours of all
objects and thus cleans thoroughly and
gently.
- The crevice nozzle (fig. 1/15) is ideal for
cracks in sofas and car seats.
2. If required, you can interpose the articulat-
ed joint (fig. 4).
NOTE:
For information on use of the turbo brush
see chapter 3.5, „If required: insert the
turbo brush".
3. Once you have fitted the components, you
can connect the appliance and switch it on
at the On/Off button (fig. 2/17, position "I").
4. Make sure that you switch off the appli-
ance before you remove or fit accessories.
NOTE:
Use the release catch (fig. 2/19) if you
want to release the attached nozzle again.