PRO-POINT 208CC OHV Manuel De L'utilisateur page 16

8628257 208CC OHV GAS ENGINE WITH ELECTRIC START
HOW TO CHECK OIL
1. Level the engine or the equipment the engine is mounted on.
2. Clean the oil fill area of any dirt and debris to prevent
contamination that can damage the engine.
3. The engine has a dipstick that is either part of the oil fill plug
(L) or a separate component (see Parts Identification).
3.1 Remove the dipstick (L) and wipe with a clean cloth.
3.2 Reinsert the dipstick into the filler neck until it rests on
the opening's rim. Do not screw the oil fill plug back into
the opening (Fig. 4).
3.3 Remove the dipstick and check that the oil is between
the Full and Fill marks. Add or drain oil based on the
measurement.
3.4 Reinsert the dipstick and either press firmly to hold in
place or screw the oil fill cap hand tight.
HOW TO ADD OIL
IMPORTANT! Read the Engine Oil section before adding oil to
ensure that it is suitable for the engine.
1. Remove the oil filler cap (L) and place to one side.
2. Place a funnel into the oil fill neck. The funnel opening should
be wide enough to prevent the oil from collecting in the
funnel's cone.
16 For technical questions call 1-800-665-8685
V 1.0
Fig. 4