Engine Oil - PRO-POINT 208CC OHV Manuel De L'utilisateur

V 1.0 208CC OHV GAS ENGINE WITH ELECTRIC START
9. Wipe up any spilled fuel before starting the engine or allow to
evaporate. Spilled fuel is both a fire hazard and an
environmental hazard. Dispose of the fuel soaked rags in a
proper hazardous waste container.

ENGINE OIL

NOTICE! Engine oil is a major factor affecting engine
performance and service life. Non-detergent and 2-stroke
engine oils will damage a 4-stroke engine and are not
recommended.
High-quality detergent engine oils are acceptable if the (API)
performance rating is SJ or higher. Always check the API service
label on the oil container for the performance rating.
1. Check the oil level before each use with a cool engine that
is level.
2. Use 4-stroke motor oil that meets or exceeds the
requirements for API (American Petroleum Institute) service
classification SJ. Always check the API Service label on the oil
container to be sure it includes the letters SJ or SL.
3. Do not use special additives.
4. SAE 10W-30 is recommended for general, all-temperature
use. Other viscosities shown on the chart may be used when
the average temperature in
your area is within the
indicated range (Fig. 3).
5. Above 27 °C (80 °F), using
10W-30 oil may increase oil
consumption. Check the oil
level more often.
6. Below 4 °C (40 °F), using
SAE 30 oil will cause hard
starting.
Visit www.princessauto.com for more information
8628257
Fig. 3
15