Menu Screen Characteristics; Data Screen Or Configurable Parameter Characteristics; Parameter Modification; Start/Stop Using The 0/1 Key - Carrier HSM Manuel D'utilisation

4.4 - Menu screen characteristics

\\MAINMENU
STATUS ARLMENU
SETPOINT CONFMEN
INPUT QCK_TEST
OUTPUTS MAINTAIN
RUNTIME LOGOUT
General Parameters Menu
Each menu item defines the access to categorised data. The
Up and Down arrows
current item. The Enter
selected sub-menu.
The item LOGOUT permits exiting from the menu screen
and protects access by a user password. The
exiting from the current screen without deactivating the
password-protected access.
4.5 - Data screen or configurable parameter
characteristics
The data screens display information parameters such as
temperatures or time schedule durations. The configuration
screens display unit control parameters such as the water
temperature setpoints.
\\MAINMENU\STATUS
MODE 0
Hp_alarm 0
pulldown 30 min
sanitime 0 min
OAT 11.2°C
Pulldown Timer
The Up and Down arrow keys
cursor on the current menu item. The Enter key
activates the parameter modification (if possible). Any
non-pertinent modification attempt is blocked by a refusal
screen.

4.6 - Parameter modification

A configuration parameter can be modified by positioning
the cursor and then pressing the Enter key
\\MAINMENU\SETPOINT
hl1_stp 45.0°C
hl1_oat 17.0°C
hl2_stp 40.0°C
dhw_stp 55.0°C
dhw_hys 5.0 C
∧
Heating Setpoint 2
en
6
ENGLISH
Current path in the menu structure
Description of the menu framed by
the selection cursor
and position the cursor at the
key activates the display of the
key permits
Current path in the menu structure
Item list
Cursor position
Description of the menu framed by
the selection cursor
and position the
.
Current path in the menu structure
Item list
Cursor position
Description of the menu framed by
the selection cursor
The following screen allows modification of a parameter.
Modify value
hl1_oat
17.0 °C
_ °C
Heating Loop 1 OAT Thresh
The Up and Down arrow key
tion of the first digit. Pressing the Up key
scrolls up to the following symbols:
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, ., -.
The Down key follows the reverse order of the Up key
in scrolling down the digit list above. Each digit is validated
with the Enter key .
The - sign is only accessible for the first selected character.
Modify value
hl1_oat
17.0 °C
16.5 °C
Heating Loop 1 OAT Thresh
The value is validated with the Enter key
the return key cancels the current modification.
ATTENTION: If the user exits from the current data screen,
the value is saved. A saving confirmation is displayed.
The Enter key validates the parameter modification(s).
The Return to the Previous Screen key
current modification(s).

4.7 - Start/stop using the 0/1 key

The HSM operates as soon as the power supply is switched
on. The key has no effect on the system.
ON Modes not defined
Screen description
Current value
Cursor position
Item description
and permit the selec-
successively
Screen description
Current value
New value before validation
Item description
. At any time
cancels the
Error message