Introduction; Parts And Service; Nameplate; Uncrating The Machine - Nilfisk Retriever 6250 SR 1800 Mode D'emploi

INTRODUCTION

This manual will help you get the most from your Nilfisk-Advance Retriever
Note: Bold numbers in parentheses indicate an item illustrated on pages A-6-10.

PARTS AND SERVICE

Repairs, when required, should be performed by Nilfisk-Advance service personnel using Nilfisk-Advance original replacement parts and accessories.
Call Nilfisk-Advance for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the right side of the machine. This information is needed when ordering repair
parts for the machine. Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL
SERIAL NUMBER

UNCRATING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can
be inspected by the carrier that delivered it. Contact the carrier immediately to file a freight damage claim.
1 After removing the crate, remove the wooden blocks next to the wheels.
2 Check the engine oil level, add oil if necessary.
3 Check the engine coolant level, add coolant if necessary.
4 Check the hydraulic oil level, add oil if necessary.
5 Read the instructions in the Preparing the Machine For Use section of this manual, then fill the fuel tank.
6 Place a ramp next to the front end of the pallet.
7 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the machine forward
from the pallet to the floor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
Use extreme CAUTION when operating this sweeper. Be certain that you are thoroughly familiar with all of the operating instructions
prior to using this sweeper. If you have any questions, contact your supervisor or your local Nilfisk-Advance Industrial Dealer.
Should your sweeper malfunction, do not attempt to correct the problem unless your supervisor directs you to do so. Have a qualified
company mechanic or an authorized Nilfisk-Advance Dealer Service person make any necessary corrections to the equipment.
Use extreme care when working on this machine. Neckties, loose clothing, long hair, rings and bracelets can get caught in moving
parts. Turn the Key Switch (52) OFF, set the Parking Brake (3) and disconnect the battery before working on the machine. Use good
common sense, practice good safety habits and pay attention to the yellow decals on this machine.
MODEL
NUMBER
56418005
56418004
56418006
56418007
* Note: Reference the separately supplied engine manufacture's maintenance and operator manual for more detailed engine specification and service data.
™ 6250 / SR 1800. Read it thoroughly before operating the machine.
ENGINE ENGINE
MAKE MODEL NUMBER
Ford VSG 413I-6005-A
Ford VSG 413I-6005-A
Ford VSG 413I-6005-A
Kubota V1505TE-1
FORM NO. 56041556 - Retriever
ENGLISH / A-3
FUEL
GASOLINE (G)
PROPANE (P)
DUAL FUEL (DU)
DIESEL (D)
™
6250 / SR 1800 - A-3