Table des Matières
Publicité
STEP 1: UNPACK ALL ITEMS
Open and unpack all items. Leave lots of working space and inspect all parts. Your chipper is
shipped in a crate, remove all sides before you begin assembly.
1.
Assemble the main feed chute with the hinges and hardware provided.
2.
Connect the wiring as shown.
NOTE: UPON INSPECTION OF PARTS IF YOU FIND ANY DAMAGED OR MISSING PARTS
PLEASE CALL DK2 POWER AT 702-331-5353 OR CONTACT US VIA OUR WEBSITE
WWW.DK2POWER.COM WE WILL REPLACE ANY MISSING PARTS TO YOU FREE
4 | OPC505AE man. v.210330
ASSEMBLY
STEP BY STEP INSTRUCTIONS
PLEASE DO NOT RETURN TO THE STORE
Publicité
Chapitres
Table des Matières
