Lubrication; Optional Accessories - DeWalt XR LI-ION DCB115 Manuel

when there is no battery pack in the cavity. Unplug the charger before attempting
to clean.
6. Do not freeze or immerse the charger in water or any other liquid.
MAINTENANCE
Your D WALT power tool has been designed to operate over a long period of time with a
e
minimum of maintenance. Continuous satisfactory operation depends upon proper tool
care and regular cleaning.

WARNING: To reduce the risk of serious personal injury, turn tool off and
disconnect battery pack before making any adjustments or removing/
installing attachments or accessories. An accidental start-up can cause injury.
The charger and battery pack are not serviceable.

Lubrication

Your power tool requires no additional lubrication.
Cleaning

WARNING: Shock hazard. Disconnect the charger from the AC outlet before
cleaning. Dirt and grease may be removed from the exterior of the charger using a
cloth or soft non-metallic brush. Do not use water or any cleaning solutions. Never let
any liquid get inside the tool; never immerse any part of the tool into a liquid.

WARNING: Blow dirt and dust out of the main housing with dry air as often as dirt
is seen collecting in and around the air vents. Wear approved eye protection and
approved dust mask when performing this procedure.

WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic
parts of the charger. These chemicals may weaken the materials used in these parts.

Optional Accessories


WARNING: Since accessories, other than those offered by D
tested with this product, use of such accessories with this tool could be hazardous. To
reduce the risk of injury, only D
this product.
Consult your dealer for further information on the appropriate accessories.
WALT recommended accessories should be used with
e
EngLIsh
WALT, have not been
e
39