Dornbracht 35 150 970 90 Mode D'emploi page 6

> 150
> 150
45
45
40 40
35
35
30
30
25
25
20
20
15
15
10
10
5
5
0
0
1 2
0 1
0
bar
6
1.0 PARTS SUPPLIED
Concealed pipe interrupter,
Concealed rough parts: 35.150.970.90
exposed trim parts: 36.150.970
DN 20 3/4" outer thread,
brass housing,
plastic insert (replaceable),
Fig. 1
Fig. 1
plastic top, reducible in length,
with covering rosette
Fig. 2 The direction of flow is indicated by the arrow
on the back of the brass housing.
When installing, make sure that the direction of flow
is angled or vertically downwards.
The pipe line downstream from the concealed pipe
interrupter must not rise any further.
Fig. 3 Installation with a concealed pipe interrupter
in accordance with the specifications laid down in
DIN 1988 (TRWI), Part 4.
Fig. 2
Fig. 2
Fig. 3 Fig. 3
3 4
3 4
2
bar
1.0 PARTS SUPPLIED
Concealed pipe interrupter,
Concealed rough parts: 35.150.970.90
exposed trim parts: 36.150.970
DN 20 3/4" outer thread,
brass housing,
plastic insert (replaceable),
plastic top, reducible in length,
with covering rosette
Fig. 2 The direction of flow is indicated by the arrow
on the back of the brass housing.
When installing, make sure that the direction of flow
is angled or vertically downwards.
The pipe line downstream from the concealed pipe
interrupter must not rise any further.
Fig. 3 Installation with a concealed pipe interrupter
in accordance with the specifications laid down in
EN 1717.
US
US
GB GB