Schulthess WT14 EFH W2 Mode D'emploi page 31

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important
Check that there is no tension on the
drainage hose.
Strong tension may kink the hose, which
prevents the condensation water from
being pumped out.
Ensure that the pump must not pump
higher than 100 cm and that no waste
water can ran back into the condensa-
tion pan.
If the distance to the drain at the
customer's is too big, you can obtain
an extension set from your specialist
dealer or customer service:
Drain hose extension 2 m
Order no: 51023
Possibilities for connection
Introduction of the condensate
hose into a standpipe with siphon
Route drainage hose into shared
siphon
Machines are set up next to each other
Washer-dryer tower
When using the same siphon for the
washing machine and the dryer, it might
become necessary to install a check
valve on the back wall of the dryer.
You can obtain non-return valves from
your specialist dealer or our After-Sales
Service.
Non-return valve
Order no: E 631 944.
EN 31

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wt 14 efh w

Table des Matières