Cleaning The Shaver Under The Tap - Philips 9000 Série Mode D'emploi

Cleaning the shaver under the tap

Remove the cleaning cartridge from the
SmartClean system and pour out any remaining
cleaning fluid.
You can simply pour the cleaning fluid down
the sink.
Throw away the empty cleaning cartridge.
Unpack the new cleaning cartridge and pull off
the seal.
Place the cleaning cartridge in the SmartClean
system.
Push the top part of the SmartClean system
back down click .
Clean the shaver after every shave for optimal
performance.
Caution: Be careful with hot water. Always check
if the water is not too hot, to prevent burning
your hands.
Never dry the shaving unit with a towel or tissue,
as this may damage the shaving heads.
Switch on the shaver.
27
English