Dimmer Control; Tone Control - Sangean RCR-20 Mode D'emploi

Display & Audio setup

Dimmer control

The brightness of the display may be adjusted. If you use the unit in the bedroom, you may prefer a
higher brightness level than the standard setting.
1. Press and release the Snooze/Dimmer button repeatedly to adjust the brightness level of the LCD
display. The backlight level will change with 8 different illumination levels, you'll be able to see the
effect of the change.
2. Stop when the desired backlight level is reached.

Tone control

You can adjust the bass and treble of the sound of your RCR-20 to enhance the tone while listening.
1. First ensure your radio is switched on. Press and release the Volume control button to enter the
tone control setting.
2. The bass value will appear on the display. Rotate the Volume control knob to adjust between +5~-5,
and press and release the Volume control button to confirm the setting.
3. Then the treble value will appear on the display. Rotate the Volume control knob to adjust between
+5~-5, and press and release the Volume control button to confirm the setting.
4. You can also press the Bass up/down button and Treble up/down button on the Remote control to
adjust the bass and treble of the sound.
Loudness
You can get compensation on lower and higher frequency for your RCR-20 by adjusting the
Loudness function.
1. Press and hold the Info/Menu button to enter the menu setting.
2. Rotate the Tuning control knob until LOUD ON/OFF appears on the display. Press and release
the Tuning control button to enter the setting.
3. Rotate the Tuning control knob to choose ON to turn on the Loudness function, then press and
release the Tuning control button to confirm the setting.
4. To turn off the Loudness function, select OFF and press and release the Tuning control button to
confirm the setting.
1-3
GB
22